 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| document no. u13549ej2v0um00 (2nd edition) date published september 2002 n cp(k) printed in japan user?s manual 1998 ? IE-78K0S-NS in-circuit emulator target devices 78k/0s series
user?s manual u13549ej2v0um 2 [memo] user?s manual u13549ej2v0um 3 v40 and v850 series are trademarks of nec corporation. windows is either a registered trademark or trademark of microsoft corporation in the united states and/or other countries. pc/at is a trademark of international business machines corporation. m8e 00. 4 the information in this document is current as of july, 2002. the information is subject to change without notice. for actual design-in, refer to the latest publications of nec's data sheets or data books, etc., for the most up-to-date specifications of nec semiconductor products. not all products and/or types are available in every country. please check with an nec sales representative for availability and additional information. no part of this document may be copied or reproduced in any form or by any means without prior written consent of nec. nec assumes no responsibility for any errors that may appear in this document. nec does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of nec semiconductor products listed in this document or any other liability arising from the use of such products. no license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec or others. descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. the incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. nec assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. while nec endeavours to enhance the quality, reliability and safety of nec semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. to minimize risks of damage to property or injury (including death) to persons arising from defects in nec semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. nec semiconductor products are classified into the following three quality grades: "standard", "special" and "specific". the "specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. the recommended applications of a semiconductor product depend on its quality grade, as indicated below. customers must check the quality grade of each semiconductor product before using it in a particular application. "standard": computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "special": transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "specific": aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. the quality grade of nec semiconductor products is "standard" unless otherwise expressly specified in nec's data sheets or data books, etc. if customers wish to use nec semiconductor products in applications not intended by nec, they must contact an nec sales representative in advance to determine nec's willingness to support a given application. (note) (1) "nec" as used in this statement means nec corporation and also includes its majority-owned subsidiaries. (2) "nec semiconductor products" means any semiconductor product developed or manufactured by or for nec (as defined above). ? ? ? ? ? ? user ? s manual u13549ej2v0um 4 regional information some information contained in this document may vary from country to country. before using any nec product in your application, piease contact the nec office in your country to obtain a list of authorized representatives and distributors. they will verify: ? device availability ? ordering information ? product release schedule ? availability of related technical literature ? development environment specifications (for example, specifications for third-party tools and components, host computers, power plugs, ac supply voltages, and so forth) ? network requirements in addition, trademarks, registered trademarks, export restrictions, and other legal issues may also vary from country to country. nec electronics inc. (u.s.) santa clara, california tel: 408-588-6000 800-366-9782 fax: 408-588-6130 800-729-9288 nec electronics hong kong ltd. hong kong tel: 2886-9318 fax: 2886-9022/9044 nec electronics hong kong ltd. seoul branch seoul, korea tel: 02-528-0303 fax: 02-528-4411 nec electronics shanghai, ltd. shanghai, p.r. china tel: 021-6841-1138 fax: 021-6841-1137 nec electronics taiwan ltd. taipei, taiwan tel: 02-2719-2377 fax: 02-2719-5951 nec electronics singapore pte. ltd. novena square, singapore tel: 253-8311 fax: 250-3583 nec do brasil s.a. electron devices division guarulhos-sp, brasil tel: 11-6462-6810 fax: 11-6462-6829 j02.4 nec electronics (europe) gmbh duesseldorf, germany tel: 0211-65 03 01 fax: 0211-65 03 327 sucursal en espa ? a madrid, spain tel: 091-504 27 87 fax: 091-504 28 60 v lizy-villacoublay, france tel: 01-30-67 58 00 fax: 01-30-67 58 99 succursale fran ? aise filiale italiana milano, italy tel: 02-66 75 41 fax: 02-66 75 42 99 branch the netherlands eindhoven, the netherlands tel: 040-244 58 45 fax: 040-244 45 80 branch sweden taeby, sweden tel: 08-63 80 820 fax: 08-63 80 388 united kingdom branch milton keynes, uk tel: 01908-691-133 fax: 01908-670-290 user?s manual u13549ej2v0um 5 major revisions in this edition page description throughout ? addition of interface board ie-70000-pci-if-a ? deletion of interface card ie-70000-cd-if and addition of ie-70000-cd-if-a p.12 figure 1-1 IE-78K0S-NS system configuration ? supply media of debugger id78k0s-ns changed to cd-rom ? addition of web site where device file can be obtained as note 1 pp.19 to 21, 24, and 25 chapter 3 installation ? modification of figure 3-1 connecting emulation board (when using an emulation board on which p1, p2, and p3 connectors are mounted) ? modification of figure 3-2 connecting emulation board (when using an emulation board on which cn5, cn6, cn7, and cn8 connectors are mounted) ? modification of figure 3-3 connecting emulation probe ? deletion of sw1 from previous edition and addition of sw2 in figure 3-6 default settings of sw2, sw3, sw4, jp1, and jp4 ? addition of cn4 and sw2 in figure 3-7 part names of g-789000 board pp.26 and 27 addition of appendix a interface board (ie-70000-pci-if-a) for desktop pc pp.28 and 29 deletion of previous appendix c pc card interface (ie-70000-cd-if) addition of appendix b pc card interface (ie-70000-cd-if-a) pp.30 to 32 modification of appendix c interface board (ie-70000-98-if-c) for pc-9800 series (except for nx series) pp.33 to 35 modification of appendix d interface board (ie-70000-pc-if-c) for ibm pc/at and compatibles the mark shows major revised points. user?s manual u13549ej2v0um 6 introduction product overview the IE-78K0S-NS is used in combination with an emulation board (ie-789 -ns-em1) to debug products in the 78k/0s series of 8-bit single-chip microcontrollers. readers this manual is intended for engineers who perform debugging of systems that use products in the 78k/0s series of 8-bit single-chip microcontrollers, using the IE-78K0S-NS and an emulation board (ie-789 -ns- em1). purpose the purpose of this manual is to help the reader understand the debugging functions that are available by using the IE-78K0S-NS and an emulation board (ie-789 -ns-em1) together. organization when using the IE-78K0S-NS, please refer to the manual (this manual) that comes with the IE-78K0S-NS as well as the manual that comes with the emulation board (ie-789 -ns-em1). ? basic specifications ? function outline ? system configuration ? target interface differences ? external interface function how to read this manual to understand the overall functions of the IE-78K0S-NS read this manual in the order of the contents. to understand the basic specifications refer to chapter 1 general and chapter 2 part names . for how to connect the ie-789 -ns-em1 and make settings to debug 78k/0s series products refer to chapter 3 installation . IE-78K0S-NS user?s manual (this manual) ie-789 -ns-em1 user?s manual user?s manual u13549ej2v0um 7 terminology the meanings of the terms used in this manual are described in the table below. terms meaning emulation device this is a general term for the device in the emulator that is used to emulate the target device. it includes the emulation cpu. emulation cpu this is the cpu block in the emulator that is used to execute user-generated programs. target device this is the device to be emulated. target system this is the system to be debugged. it includes the target program and the hardware created by the user. when defined narrowly, it includes only the hardware. conventions data significance: higher digits on the left and lower digits on the right note : footnote for item marked with note in the text caution : information requiring particular attention remark : supplementary information user?s manual u13549ej2v0um 8 contents chapter 1 general .......................................................................................................... ................ 11 1.1 system configuration ........................................................................................................ ...... 11 1.2 hardware configuration ...................................................................................................... .... 13 1.3 basic specifications ........................................................................................................ ........ 14 chapter 2 part names...................................................................................................... ............. 15 2.1 parts of main unit .......................................................................................................... ........... 15 2.2 board name .................................................................................................................. ............ 17 chapter 3 installation ..................................................................................................... ............ 18 3.1 connection.................................................................................................................. .............. 18 3.2 external trigger functions.................................................................................................. .... 23 3.3 jumper or switch settings (on main board (g-789000 board))........................................... 24 appendix a interface board (ie-70000-pci-if-a) for desktop pc ............................... 26 a.1 introduction ................................................................................................................ .............. 26 a.2 installation ................................................................................................................ ................ 27 appendix b pc card interface (ie-70000-cd-if-a) ................................................................ 28 b.1 introduction ................................................................................................................ .............. 28 b.2 installation ................................................................................................................ ................ 29 appendix c interface board (ie-70000-98-if-c) for pc-9800 series (except for nx series) ............................................................................................ 30 c.1 introduction ................................................................................................................ .............. 30 c.2 installation ................................................................................................................ ................ 31 appendix d interface board (ie-70000-pc-if-c) for ibm pc/at and compatibles...................................................................................................... 33 d.1 introduction ................................................................................................................ .............. 33 d.2 installation ................................................................................................................ ................ 34 user?s manual u13549ej2v0um 9 list of figures figure number title page 1-1 IE-78K0S-NS system configuration............................................................................................ ................... 12 1-2 basic hardware configuration of IE-78K0S-NS ................................................................................. ............ 13 2-1 main board (g-789000 board) ................................................................................................. ...................... 17 3-1 connecting emulation board (when using an emulation board on which p1, p2, and p3 connectors are mounted) .................................. 19 3-2 connecting emulation board (when using an emulation board on which cn5, cn6, cn7, and cn8 connectors are mounted)................. 20 3-3 connecting emulation probe.................................................................................................. ........................ 21 3-4 connecting ac adapter....................................................................................................... ........................... 22 3-5 connecting dedicated bus interface cable.................................................................................... ................ 22 3-6 default settings of sw2, sw3, sw4, jp1, and jp4 ............................................................................. ......... 24 3-7 part names of g-789000 board ................................................................................................ ..................... 25 a-1 mounting of pci board and connector boards .................................................................................. ............ 27 c-1 int jp, wait jp settings .................................................................................................... .......................... 32 d-1 int jp, wait jp settings .................................................................................................... .......................... 35 user?s manual u13549ej2v0um 10 list of tables table number title page 1-1 list of functions (max. specifications) ..................................................................................... .....................14 3-1 electrical characteristics .................................................................................................. ..............................23 c-1 sw1 and sw2 settings when setting i/o address to 01d h........................................................................31 d-1 sw1 and sw2 settings when setting i/o address to 020 h ........................................................................34 user?s manual u13549ej2v0um 11 chapter 1 general the IE-78K0S-NS is a development tool for effectively debugging hardware and software using a 78k/0s series 8- bit single-chip microcontroller. this chapter describes the system configuration and basic specifications of the IE-78K0S-NS. 1.1 system configuration figure 1-1 shows the system configuration of the IE-78K0S-NS. chapter 1 general user?s manual u13549ej2v0um 12 figure 1-1. IE-78K0S-NS system configuration host machine pc-9800 series or ibm pc/at tm and compatibles integrated debugger id78k0s-ns (sold separately) device file note 1 (available separately) control software ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? interface board ie-70000-98-if-c (sold separately) interface board ie-70000-pc-if-c (sold separately) interface board ie-70000-pci-if-a (sold separately) or fg cable IE-78K0S-NS (this product) interface cable (ns interface cable) in-circuit emulator ie-70000-cd-if-a (sold separately) ac adapter ie-70000-mc-ps-b (sold separately) emulation probe np- note 3 (sold separately) emulation board ie-789 -ns-em1 (sold separately) conversion socket ev- - note 4 (sold separately) tq - note 5 (sold separately) interface card ns card cable mc card cable note 2 interface cable notes 1. the device file can be downloaded from the web site of nec electron devices (http://www.ic.nec.co.jp/micro/) 2. this cable is used for the v850 series tm . it cannot be used for the IE-78K0S-NS. 3. the np- is a product of naito densei machida mfg. co., ltd. (tel + 81-45-475-4191). contact an nec distributor when purchasing. 4. the ev- - is a product of nec. 5. the tq - is a product of tokyo eletech corporation. inquiries: daimaru kogyo, co., ltd. tokyo electronics department (tel: + 81-3-3820-7112) osaka electronics department (tel: + 81-6-6244-6672) chapter 1 general user ? s manual u13549ej2v0um 13 1.2 hardware configuration the IE-78K0S-NS consists of the following hardware units (such as cabinet and boards). ? cabinet ? 78k0s main board ? ns interface cable figure 1-2. basic hardware configuration of IE-78K0S-NS host machine interface board (sold separately) interface card (sold separately) dedicated bus interface 78k0s main board IE-78K0S-NS (this product) emulation probe (sold separately) emulation board ie-789 -ns-em1 (sold separately) ie-789 -ns-em1 chapter 1 general user?s manual u13549ej2v0um 14 1.3 basic specifications table 1-1. list of functions (max. specifications) parameter description supervisor v40 tm (operating frequency: 16.0 mh z ) target device 78k0s series ( pd789 ) system clock same as target device external pulse input clock supply internal mounted on ie-789 -ns-em1 substitute memory capacity 64 kb internal rom 256 bytes internal high-speed ram 8 bytes mapping unit internal low-speed ram 64 bytes emulation function ? real-time execution ? break execution ? step execution real-time internal ram monitor all the internal ram area event detection ? program execution detection ? bus event detection ? external trigger detection trigger output ( 1) and open-drain output event integration ? path condition ? trace qualify condition ? delay condition ? trigger condition break factor ? event break ? manual break ? command break ? fail-safe break trace factor ? all traces ? qualify trace trace capacity 64-bit 8 kb real-time trace trace contents address, data, and status execution time measurement up to 4 minutes 28 seconds, resolution: 62.5 ns target interface emulation probe (sold separately) provided for each target device shape host interface dedicated bus interface low-voltage support based on the emulation board (sold separately) host machine pc-9800 series, or ibm pc/at and compatibles power supply dc 5 v dimensions w235 d195 h39 (mm) user?s manual u13549ej2v0um 15 chapter 2 part names this chapter introduces the parts of the IE-78K0S-NS main unit. the packing box contains the IE-78K0S-NS main unit. if there are any missing or damaged items, please contact an nec sales representative. please make sure to fill out and return the guarantee card that comes with the main unit. 2.1 parts of main unit (1) probe end (2) top view t v c c target system power supply led probe interface power in circuit emulator power supply led chapter 2 part names user ? s manual u13549ej2v0um 16 (3) interface fg off on reset host-i/f dc in - + reset switch (reset) dedicated bus interface connector (host-i/f) power switch (off/on) chapter 2 part names user?s manual u13549ej2v0um 17 2.2 board name IE-78K0S-NS contains this board. ? main board (g-789000 board): 1 check that you have the correct board. to access the inside of the unit, remove the four screws from the sides of the main unit and open the lid. figure 2-1. main board (g-789000 board) remark the above shows the main board mounted in the main unit. user?s manual u13549ej2v0um 18 chapter 3 installation this chapter describes how to connect the cables to the IE-78K0S-NS and the mode settings. 3.1 connection connect the following seven products which are sold separately. refer to figure 1-1 system configuration of IE-78K0S-NS in chapter 1 general for the system configuration of the IE-78K0S-NS. ? ie-70000-98-if-c: interface board (use cable that comes with the IE-78K0S-NS) ? ie-70000-pc-if-c: interface board (use cable that comes with the IE-78K0S-NS) ? ie-70000-pci-if-a: interface board (use cable that comes with the IE-78K0S-NS) ? ie-70000-cd-if-a: interface card (ns card cable and mc card cable are included) ? ie-70000-mc-ps-b: ac adapter ? ie-789 -ns-em1: emulation board ? np- note : emulation probe note the np- is a product of naito densei machida mfg. co., ltd. (tel: +81-45-475-4191). caution connecting and removing cables or components from the target system and changing the settings of switches, etc. should be carried out after turning off the power of the IE-78K0S-NS main unit and the target system. chapter 3 installation user?s manual u13549ej2v0um 19 (1) connecting emulation board (ie-789 -ns-em1) the ie-789 -ns-em1 is sold separately. figure 3-1. connecting emulation board (when using an emulation board on which p1, p2, and p3 connectors are mounted) <1> remove the screws from the sides of the main unit, and then remove the top cover. <2> remove the first plate from the bottom by removing the screws. <3> connect the ie-789 -em1 and fasten the two screws to the emulation board. <4> when using a probe, connect the probe. <5> connect the top cover and fasten the four screws on the sides. emulation board refer to probe connection (2) chapter 3 installation user?s manual u13549ej2v0um 20 figure 3-2. connecting emulation board (when using an emulation board on which cn5, cn6, cn7, and cn8 connectors are mounted) <1> remove the screws from the sides of the main unit, and then remove the top cover. <2> remove the first and second plates from the bottom by removing the screws. <3> connect the i/o board and align the spacers that come with the ie-789 -ns-em1 at the four positions shown below. <4> align the probe board with the i/o board and fix by tightening the four connection screws i/o board supplied spacer align supplied spacer align here probe board i/o board <5> when using a probe, connect the probe. <6> connect the top cover and fasten the four screws on the sides. refer to probe connection (2) ie-789 -ns-em1 (probe board) ie-789 -ns-em1 (i/o board) chapter 3 installation user ? s manual u13549ej2v0um 21 (2) connecting emulation probe (np- ) the np- is sold separately. figure 3-3. connecting emulation probe emulation probe (np- ) emulation board (ie-789 -ns-em1) main board (g-789000 board) caution the emulation probe (np- ) mounting location varies depending on the model of the ie- 789 -ns-em1 in use. for details, refer to the ie-789 -ns-em1 user?s manual. chapter 3 installation user ? s manual u13549ej2v0um 22 (3) connecting ac adapter (ie-70000-mc-ps-b) ie-70000-mc-ps-b is sold separately. <1> insert the ac adapter plug into the dc in socket of the IE-78K0S-NS. figure 3-4. connecting ac adapter (4) connecting interface cable <1> insert the cable into the bus interface connector on the IE-78K0S-NS main unit. figure 3-5. connecting dedicated bus interface cable caution the type of interface cable varies depending on the interface board and interface card. ? when using an interface board (ie-70000-98-if-c, ie-70000-pc-if-c, or ie-70000-pci-if-a) connect the ns interface cable that comes with the IE-78K0S-NS. ? when using an interface card (ie-70000-cd-if-a) connect the ns card cable that comes with the ie-70000-cd-if-a. the ie-70000-98-if-c, ie-70000-pc-if-c, ie-70000-pci-if-a, and ie-70000-cd-if-a are sold separately. fg off on reset host-i/f dc in - + reset switch (reset) dedicated bus interface connector (host-i/f) power switch (off/on) fg off on reset host-i/f dc in - + reset switch (reset) dedicated bus interface connector (host-i/f) power switch (off/on) chapter 3 installation user ? s manual u13549ej2v0um 23 3.2 external trigger functions (1) extout at the occurrence of a break event, the extout pin on the emulation board (ie-789 -ns-em1) outputs a low level for 1.3 s. caution because the output is open drain, connect a pull-up resistor in the target system. (2) extin the extin pin on the emulation board (ie-789 -ns-em1) can be used to input an event signal. enter high- level pulse signals for two or more cpu clocks. caution for the electrical characteristics, refer to table 3-1. table 3-1. electrical characteristics parameter min. [v] max. [v] high-level input voltage target voltage 0.7 target voltage low-level input voltage 0 target voltage 0.3 chapter 3 installation user ? s manual u13549ej2v0um 24 3.3 jumper or switch settings (on main board (g-789000 board)) (1) default settings of jumper or switch figure 3-6. default settings of sw2, sw3, sw4, jp1, and jp4 sw3 1 3 2 jp1 1 2345 off 678 sw4 1 3 2 jp4 1 2345 off 678 sw2 (push button): reset sw3 (dip switch): on (fixed) sw4 (dip switch): on (fixed) jp1: 2 and 3 shorted jp4: 1 and 2 shorted jp2 and jp3 are not used. chapter 3 installation user ? s manual u13549ej2v0um 25 figure 3-7. part names of g-789000 board cn7 jk1 sw1 cn5 p1 jp1 cn6 sw3 jp4 sw4 p3 cn8 p2 dedicated bus interface connector (host-i/f) cn4 sw2 user?s manual u13549ej2v0um 26 appendix a interface board (ie-70000-pci-if-a) for desktop pc this chapter describes the setting method when connecting the IE-78K0S-NS. for details, refer to the ie-70000-pci-if-a user?s manual (to be prepared). a.1 introduction the ie-70000-pci-if-a is an interface board that is installed in the pci bus slot of a pc incorporating windows tm 95/98 or windows nt4.0/2000. first of all, check that you have the following items. ? interface board (ie-70000-pci-if-a) for desktop pc 1 ? 8-bit connector board (connected to ie-70000-pci-if-a) 1 ? 32-bit connector board 1 ? user?s manual 1 ? dll-disk 1 ? ie-pc driver disk 1 ? guarantee card 1 appendix a interface board (ie-70000-pci-if-a) for desktop pc user?s manual u13549ej2v0um 27 a.2 installation (1) board settings there are no jumpers or dip switches on the ie-70000-pci-if-a. (2) 8-bit connector board mounting an 8-bit connector board is premounted at shipment. remark when a 32-bit board is mounted, place it on the 8-bit connector board using the combination connector (refer to figure a-1 ) and fasten them together with screws. caution the 32-bit connector board is included for future function expansion. figure a-1. mounting of pci board and connector boards ch1 ch0 pci board 32-bit connector board combination connector combination connector combination connector 8-bit connector board (3) installation in pc make sure that the pc is turned off, then install the interface board in the pci bus slot following the instructions in the pc ? s manual. at installation, fasten the pci board to the pc with screws. (4) ie-pc driver installation refer to the supplied ie-pc driver disk readme_e.txt for ie-pc driver installation. (5) connecting with IE-78K0S-NS using the supplied cable, connect the IE-78K0S-NS to the ch0 side. caution connection with the IE-78K0S-NS is possible on the ch0 side only. user?s manual u13549ej2v0um 28 appendix b pc card interface (ie-70000-cd-if-a) this chapter describes the setting method when connecting the IE-78K0S-NS. for details, refer to the ie-70000-cd-if-a user?s manual (to be prepared). b.1 introduction the pc card interface (ie-70000-cd-if-a) is an interface card for an ie product that is installed in the pcmcia2.1/jeida standard ver. 4.2-compliant pc card slot of a pc incorporating windows 95/98 or windows nt 4.0/2000. first of all, check that you have the following items. ? pc card interface (ie-70000-cd-if-a) 1 ? mc-a cable 1 ? ns-a cable 1 ? user?s manual 1 ? dll-disk 1 ? ie-pc driver disk 1 ? guarantee card 1 appendix b pc card interface (ie-70000-cd-if-a) user?s manual u13549ej2v0um 29 b.2 installation (1) installation in pc for windows 95/98/2000, insert the pcmcia card in the card slot when the power supply of the pc is turned on. for windows nt 4.0, insert the card in the slot when the power supply is turned off. be careful to insert the card in the correct direction. (2) ie-pc driver installation refer to the supplied ie-pc driver disk readme_e.txt for pcmcia driver installation. caution this interface card cannot be connected to the ie-78 -r. actually, installation ends completely by selecting ?ie-78 -r? displayed in the ie-pc driver disk installation menu. in this case, however, the installation is invalid. (3) connection with the IE-78K0S-NS-a using the ns-a cable, connect the ie-70000-cd-if-a to the IE-78K0S-NS. caution be sure to use the ns-a cable when connecting to the IE-78K0S-NS-a. if mc-a cable is used, the ie-70000-cd-if-a may be damaged. user?s manual u13549ej2v0um 30 appendix c interface board (ie-70000-98-if-c) for pc-9800 series (except for nx series) this chapter describes the setting method when connecting the IE-78K0S-NS. for details, refer to the ie-70000-98-if-c user?s manual (to be prepared). c.1 introduction the ie-70000-98-if-c is an interface board for the pc-9800 series (except for nx series) that is installed in the c bus slot of a pc-9800 series (except for nx series) machine. caution the pc98-nx series is treated as an ibm pc/at compatible machine. refer to appendix a interface board (ie-70000-pci-if-a) for desktop pc. first of all, check that you have the following items. ? interface board (ie-70000-98-if-c) for pc-9800 series 1 ? user?s manual 1 ? dll-disk 1 ? ie-pc driver disk 1 ? guarantee card 1 appendix c interface board (ie-70000-98-if-c) for pc-9800 series (except for nx series) user?s manual u13549ej2v0um 31 c.2 installation (1) i/o address settings sw1 and sw2 are the switches selecting the c bus i/o addresses. sw1 numbers 1 to 8 correspond to c bus addresses a4 to a11, and sw2 numbers 1 to 4 correspond to c bus addresses a12 to a15. in the IE-78K0S-NS, the addresses should be set in the 16 bytes between 00d h and ffd h. the switch takes the value ?0? when on and ?1? when off. the addresses used for setup must be values that are not used in the pc system or for other boards. in addition, since these values are used during software installation, make a note of them for future reference. setting examples of i/o address, sw1 and sw2 are shown below. table c-1. sw1 and sw2 settings when setting i/o address to 01d h sw1 number12345678 address a4 a5 a6 a7 a8 a9 a10 a11 on 0 000 off 1 1 1 1 sw2 number12345678 address a12 a13 a14 a15 off off on off on 0 000 0 off 1 1 1 caution set sw2 number 7 to on and sw2 numbers 5, 6, and 8 to off. appendix c interface board (ie-70000-98-if-c) for pc-9800 series (except for nx series) user?s manual u13549ej2v0um 32 (2) jumper settings the int jp and wait jp are c bus interrupt and wait selection jumpers. in the IE-78K0S-NS, set int jp to no use, and wait jp to 1 and 2 shorted. figure c-1. int jp, wait jp settings 12 wait jp 3 : shorted 12 int jp shorted no use ir3 ir5 ir6 ir9 ir11 ir12 ir13 (3) installation in pc make sure that the pc is turned off, then install the interface board in the c bus slot following the instructions in the pc ? s manual. at installation, fasten the interface board to the pc with screws. (4) ie-pc driver installation refer to the supplied ie-pc driver disk readme_e.txt for ie-pc driver installation. (5) connecting with IE-78K0S-NS using the supplied cable, connect the IE-78K0S-NS to ch0. caution connection with the IE-78K0S-NS is possible to ch0 only. for connection with other models, refer to their respective manuals. user?s manual u13549ej2v0um 33 appendix d interface board (ie-70000-pc-if-c) for ibm pc/at and compatibles this chapter describes the setting method when connecting the IE-78K0S-NS. for details, refer to the ie-70000-pc-if-c user?s manual (to be prepared). d.1 introduction the ie-70000-pc-if-c is an interface board for ibm pc/at and compatibles and is installed in the isa bus slot of ibm pc/at and compatibles. first of all, check that you have the following items. ? interface board (ie-70000-pc-if-c) for ibm pc/at 1 ? user?s manual 1 ? dll-disk 1 ? ie-pc driver disk 1 ? guarantee card 1 appendix d interface board (ie-70000-pc-if-c) for ibm pc/at and compatibles user?s manual u13549ej2v0um 34 d.2 installation (1) i/o address settings sw1 and sw2 are the switches selecting the isa bus i/o addresses. sw1 numbers 1 to 8 correspond to isa bus addresses a4 to a11, and sw2 numbers 1 to 4 correspond to isa bus addresses a12 to a15. in the IE-78K0S-NS, the addresses should be set between 020 h and 03f h. the switch takes the value ?0? when on and ?1? when off. the addresses used for setup must be values that are not used in the pc system or for other boards. in addition, since these values are used during software installation, make a note of them for future reference. setting examples of i/o address, sw1 and sw2 are shown below. table d-1. sw1 and sw2 settings when setting i/o address to 020 h sw1 number12345678 address a4a5a6a7a8a9a10a11 on 0 0000 00 off 1 sw2 number12345678 address a12 a13 a14 a15 off off on off on 0 000 0 off 1 1 1 caution set sw2 number 7 to on and sw2 numbers 5, 6, and 8 to off. appendix d interface board (ie-70000-pc-if-c) for ibm pc/at and compatibles user?s manual u13549ej2v0um 35 (2) jumper settings the int jp and wait jp are isa bus interrupt and wait selection jumpers. in the IE-78K0S-NS, set int jp to no use, and wait jp to 1 and 2 shorted. figure d-1. int jp, wait jp settings 12 wait jp 3 : shorted 12 int jp no use shorted irq2 irq3 irq4 irq5 irq6 irq7 (3) installation in pc make sure that the pc is turned off, then install the interface board in the isa bus slot following the instructions in the pc ? s manual. at installation, fasten the interface board to the pc with screws. (4) ie-pc driver installation refer to the supplied ie-pc driver disk readme_e.txt for ie-pc driver installation. (5) connecting with IE-78K0S-NS using the supplied cable, connect the IE-78K0S-NS to ch0. caution connection with the IE-78K0S-NS is possible to ch0 only. for connection with other models, refer to their respective manuals. user ? s manual u13549ej2v0um 36 [memo] user?s manual u13549ej2v0um 37 [memo] user?s manual u13549ej2v0um 38 [memo] although nec has taken all possible steps to ensure that the documentation supplied to our customers is complete, bug free and up-to-date, we readily accept that errors may occur. despite all the care and precautions we've taken, you may encounter problems in the documentation. please complete this form whenever you'd like to report errors or suggest improvements to us. hong kong, philippines, oceania nec electronics hong kong ltd. fax: +852-2886-9022/9044 korea nec electronics hong kong ltd. seoul branch fax: +82-2-528-4411 p.r. china nec electronics shanghai, ltd. nec electronics taiwan ltd. fax: +86-21-6841-1137 address north america nec electronics inc. corporate communications dept. fax: +1-800-729-9288 +1-408-588-6130 europe nec electronics (europe) gmbh market communication dept. fax: +49-211-6503-274 south america nec do brasil s.a. fax: +55-11-6462-6829 taiwan asian nations except philippines nec electronics singapore pte. ltd. fax: +886-2-2719-5951 fax: +65-250-3583 japan nec semiconductor technical hotline fax: +81- 44-435-9608 i would like to report the following error/make the following suggestion: document title: document number: page number: thank you for your kind support. if possible, please fax the referenced page or drawing. excellent good acceptable poor document rating clarity technical accuracy organization cs 02.3 name company from: tel. fax facsimile message |
Price & Availability of IE-78K0S-NS
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |